|Year : 2015 | Volume
| Issue : 3 | Page : 286-294
Behavior of a spontaneously arising human retinal pigment epithelial cell line cultivated on thin alginate film
Hoda Shams Najafabadi MS , Zahra-Soheila Soheili PhD , Shahla Mohammad Ganji PhD
Department of Basic Sciences, National Institute of Genetic Engineering and Biotechnology, Tehran, Iran
|Date of Submission||12-May-2014|
|Date of Acceptance||18-May-2015|
|Date of Web Publication||26-Nov-2015|
Ministry of Science, Research and Technology, National Institute of Genetic Engineering and Biotechnology, P.O. Box 14965/161, Pajoohesh Boulevard, 17th Kilometers, Tehran-Karaj Highway, Tehran 14977
Source of Support: None, Conflict of Interest: None
Purpose: A cell line spontaneously derived from human retinal pigment epithelium (hRPE) was cultured on alginate film gelatinized with different concentrations of neurobasal cell culture medium (NCCM) to assess its growth and morphological behavior on this naturally occurring polysaccharide.
Methods: Neonatal human globes were used to isolate hRPE cells. They were cultured in Dulbecco's modified Eagle's-medium-and-Ham's-F12-medium-(DMEM/F12) supplemented with 10% fetal bovine serum (FBS). Cultures were continuously studied using phase contrast microscopy. After the nineth passage, cells were characterized through immunocytochemical analysis for Oct4, Chx10, and Pax6 and Ki67 markers. In each well of a 6-well microplate, 1 and 2% weight/volume (w/v) alginate in deionized water was added and gelatinized using 1× and 10× NCCM. hRPE cells were cultured at a density of 2 × 105 cells/well in alginate-coated microplates. After 5 days, hRPE colonies were harvested and re-plated on polystyrene substrates. Morphology and growth of hRPE cultures were determined during the next 2 weeks.
Results: The first few passages of the cultures were purely hRPE cells that revealed typical morphological features of the pigmented epithelium. They made spaces, devoid of cells, between hRPE cell monolayer and fill in the unoccupied spaces. They grew faster than native RPE cells and rapidly overgrew. Immunocytochemical test revealed that the founded cells expressed Chx10, Pax6, Ki67 and Oct4. The hRPE cells survived unlimitedly on alginate film and formed giant adjoining colonies. After re-plating, hRPE colonies adhered quickly on polystyrene and displayed native hRPE morphological features.
Conclusion: Alginate film can support the survival and growth of hRPE cells and induce the cells to re-organize in tissue-like structures.
Keywords: Alginate; Human RPE Cell; Neurobasal Cell Culture Medium; RPE Cell Line; Stem/Progenitor Cell Marker
|How to cite this article:|
Najafabadi HS, Soheili ZS, Ganji SM. Behavior of a spontaneously arising human retinal pigment epithelial cell line cultivated on thin alginate film. J Ophthalmic Vis Res 2015;10:286-94
|How to cite this URL:|
Najafabadi HS, Soheili ZS, Ganji SM. Behavior of a spontaneously arising human retinal pigment epithelial cell line cultivated on thin alginate film. J Ophthalmic Vis Res [serial online] 2015 [cited 2020 Feb 26];10:286-94. Available from: http://www.jovr.org/text.asp?2015/10/3/286/170357
| Introduction|| |
Retinal pigment epithelium (RPE) is the monolayer of cells in the outer part of the retina between photoreceptors and the choroid. It is firmly attached to the photoreceptors and plays a key role in their nourishment and protection. In degenerative eye diseases, such as macular degeneration and retinitis pigmentosa, RPE cells are damaged. These cells can be a suitable source for transplantation and replacement therapy to treat degenerative eye diseases. With the advent of tissue engineering technology, it is now possible to fabricate living replacement tissue for damaged body parts.,
Cells in the human body grow within organized three-dimensional (3D) matrices, but in a culture vessel, they grow in a two-dimensional (2D) pattern. Many recent studies have introduced different natural/artificial substrates that can provide a 3D environment similar to the extracellular matrix (ECM) of soft tissues and an appropriate condition for the exchange of gases and nutrients, and for the adhesion, proliferation and differentiation of cells.
In tissue engineering, different kinds of polymers are used for creating substrates, some of which are natural, such as collagen, chitosan, hyaluronic acid, matrigel, fibrin, gelatin  and alginate, while others are synthetic, such as polylactic-co-glycolic acid (PLGA), polyglycolic acid (PGA) and polyethylene terephthalate (PET).
In this study, alginate was used as a substrate to culture RPE cells. Alginate has been widely used in tissue engineering because of its high biocompatibility, low cost, low immunogenicity and capacity of forming hydrogels under gentle conditions. Alginate can be used as an appropriate surface for growth, adhesion, proliferation and differentiation of cells. It is a natural polysaccharide that is extracted from brown marine algae and composed of guluronic (G) and mannuronic (M) acid residues. It can form hydrogels by cross-linking divalent cations such as calcium (Ca 2+), barium (Ba 2+), strontium (Sr 2+), copper (Cu 2+), nickel (Ni 2+), and zinc (Zn 2+) and trivalent cations such as aluminum (Al 3+) and ferric (Fe 3+). In this research, instead of divalent or trivalent cations, neurobasal cell culture medium (NCCM) that contains CaCl2, MgCl2, KCl, NaHCO3, and NaH2 PO4-H2O was used. Matyashet al demonstrated that NCCM increases differentiation of neural stem cells to neural cells.
In the current study, human RPE cells, which were established spontaneously in routine culture of hRPE cells, were characterized. Isolated RPE cells were cultured on alginate gelatinized with NCCM, and the morphology, viability and growth of cultured cells were studied; furthermore the ideal conditions for culture and propagation of these valuable cells was developed.
| Methods|| |
Isolation and Culture of Human RPE (hRPE) Cells
hRPE cells were isolated from human neonatal globes, up to 1 year of age, less than 24 h after death which were transferred from the Central Eye Bank of Iran to the Basic Science Laboratory at the National Institute of Genetic Engineering and Biotechnology. Isolated hRPE cells were cultured in flasks (Nunc, Roskilde, Denmark) containing Dulbecco's modified Eagle's medium and Ham's F12 (DMEM/F12) (Sigma-Aldrich, Munich, Germany) medium supplemented with 20% fetal bovine serum (FBS) (GIBCO-BRL, Eggenstein, Germany). The flasks were placed in an incubator at 37°C with a humidified atmosphere of 5% CO2. The used culture medium was replaced with fresh DMEM/F12 medium supplemented with 10% FBS every 3 days until the cells were 80% confluent. Then the cultures were passaged by routine cell culture methods. Isolated cells were assessed by immunocytochemical (ICC) tests for RPE 65 and cytokeratin as specific markers for RPE cells (data not shown).
ICC Analysis of Derived hRPE Cells
hRPE cells in 9th passage were cultured on pre-coated coverslips in a 24-well microplates (Nunc, Roskilde, Denmark) at a density of 1 × 105 cells/well and incubated for 24 h. Cultured cells were fixed using ice-cold methanol (−10°C) (Merck, Darmstadt, Germany) for 5 min at room temperature and then slides were blocked using 1% bovine serum albumin (BSA) (Merck, Darmstadt, Germany) in 1% PBST (1% Triton X-100 in PBS) (Sigma-Aldrich, Munich, Germany) for 20 min at room temperature. Coverslips were incubated in diluted solution of antibodies against Oct4, Chx10, Pax6, and Ki67 (Santa Cruz, Carlsbad, CA, USA) in 1.5% BSA and 1% PBST overnight at room temperature. Then the coverslips were incubated with the secondary antibody in 1.5% BSA and 1% PBST for 1 hour at room temperature in the dark. The secondary antibodies were fluorescein isothiocyanate (FITC)-conjugated goat anti-rabbit IgG (1:100, Santa Cruz, Carlsbad, CA, USA), FITC-conjugated goat anti-mouse IgG (1:100, Santa Cruz, Carlsbad, CA, USA), and FITC-conjugated donkey anti-goat IgG. The nuclei of cells were stained using 4',6-diamidino-2-phenylindole (DAPI) (1 mg/ml, Santa Cruz, Carlsbad, CA, USA) for 1 min. Coverslips were mounted with a drop of mounting medium (90% glycerol, 10% PBS, and 10% (w/v) phenylenediamine). Samples were observed under fluorescence microscope (Axiophot, Zeiss, Germany).
Preparation of Alginate Substrate
A 1 mm thick alginate film was prepared by adding 940 µl of 1 and 2% (v/w) sodium alginate in deionized water in 6-well plates. Alginate films were created by drying alginate solution at room temperature for 12 h. The alginate substrate was gelatinized using 2 ml of 1 × and 10× NCCM composed of 1.8 mM CaCl2, 0.814 mM MgCl2, 5.33 mM KCl, 26.19 mM NaHCO3 and 0.906 mM NaH2 PO4-H2O, and keeping the emerged substrates at room temperature for 12 h. Substrates were washed twice with sterile water and equilibrated with 2 ml of DMEM/F12 for 2 days in an incubator.
Culture of hRPE Cells on Alginate Film
hRPE cells were harvested from the 7th passage of cultures. The hRPE cells were seeded at a density of 2 × 105 cells/well in gelatinized alginate-substrate coated 6-well plates in DMEM/F12 medium supplemented with 10% FBS. Morphological changes of the cultures were followed for 2 weeks.
Re-plating hRPE Colonies to Assess Viability of the Constituent Cells
Five days after cultivating hRPE cells on alginate film, 50 µl of the cultured medium from each well was harvested. The developed colonies were precipitated and re-plated on polystyrene under routine culture conditions. Viability and morphology of the re-plated colonies were studied in the next few days.
Defining Optimum Alginate Substrates for Culturing hRPE Cells
After 2 weeks of culturing hRPE cells on alginate films, 2 ml of sodium citrate (100 mM) was added in each well and incubated for 20 min until the colonies detached from the substrates. Finally, cell suspensions were centrifuged at 300 ×g for 5 min, and the total number of isolated cells was determined.
Cell Viability Assay
The proliferative capacity of hRPE cells on alginate hydrogel film, as compared to polystyrene, was assessed by MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay. Alginate films were prepared in 96-well microplates. The hRPE cells were seeded at a density of 104 cells/well. After 2 days of culture, the cells were incubated with 0.5 mg/ml MTT (Sigma, Deisenhofen, Germany) for 4 h at 37°C. The solution was then removed and the resulting formazan crystals were dissolved using 0.01 M dimethyl sulphoxide (DMSO), and the absorbance of the resulting solution was determined at 570 nm using a plate reader (BP800 Microplate Reader, Biohit Plc, Helsinki, Finland).
ICC test, MTT assay and cell counts were performed in triplicates. MTT assay results and cell counts were compared between control and experimental conditions using one-way analysis of variance (ANOVA). To calculate the percentage of cells that were immunopositive for assessed markers, the number of cells in three different fields of vision was counted under a fluorescent microscope and average counts of immunoreactive cells was reported. P < 0.05 was considered as statistically significant.
| Results|| |
Morphological Characteristics of hRPE Cells
hRPE cells formed adherent, elongated and fusiform shapes in culture. Cells could passage up to 10 times before exhibiting hallmarks of senescence [Figure 1]. hRPE cells were routinely isolated and each sample was assessed by ICC tests for RPE 65 and cytokeratin as specific markers for RPE cells. hRPE cells were established in the 6th passage of general hRPE cultures. These cells made sizeable spaces, devoid of cells, between the monolayer of hRPE cells, and gradually invaded unoccupied spaces. They grew rapidly and occupied the whole surface of the culture vessel. Simultaneously, native hRPE cells disappeared. Morphology of these cells was quite different as compared to normal hRPE cells. They were smaller than hRPE cells and desired to make colony-like structures. After sequential passages, they got smaller and gained a more granular morphology than earlier passages. Derived hRPE cells were subcultured several times; they were passaged for more than 17 times and culture medium was needed to be changed daily [Figure 2].
|Figure 1. Morphology of human hRPE cells in culture at different magnifications, in the 4th passage of the culture. (a) Low confluency hRPE culture, magnification: ×200. (b-d) High confluency cell cultures, ×200, ×100 and ×320 magnifications, respectively. hRPE, human retinal pigment epithelial.|
Click here to view
|Figure 2. Manifestation and morphology of hRPE cell line. (a-e) Rising of hRPE cell line in unoccupied spaces between hRPE cell populations and its notable growth rate until the newly appeared cells completely populate the cultures. (f) hRPE cell line showed a great tendency to make colony.like structures. (g-i) Demonstrate hRPE cell lines in the 7th, 10th and 12th passages respectively, the cells got smaller size at higher passage numbers, magnifications. ×200. hRPE, human retinal pigment epithelial.|
Click here to view
Immunocytochemistry for Retinal
Stem/Progenitor Cell Markers in hRPE Derived Cultures
ICC revealed that hRPE cells were positive for Oct4, Chx10, Ki67+, and Pax6+ markers. Expression of Chx10 and Pax6+ proteins confirmed the identity of the isolated cells as retinal-like progenitor cells. Nearly 90% of cells expressed Chx 10 and more than 4% expressed Pax6+. In addition, more than 60% of the cells expressed nuclear Ki67 marker. This indicates that isolated cells retained their proliferative potential in vitro. Furthermore, Oct4 was detected in the nuclei of nearly 50% of the cells; this marker was expressed in embryonic stem cells (ESCs) as well
[Figure 3]. Native hRPE cells did not express the aforementioned markers in a reasonable amount. The negative controls of hRPE cells were simultaneously immunostained without using primary antibodies or without using both primary and secondary antibodies [Figure 4].
|Figure 3. Immunocytochemistry results for Chx10, Ki67+, Oct4 and Pax6+ in established hRPE cell line. (a) Nuclei of the cells were stained blue using DAPI. (b) 90% of cells in established hRPE cell line expressed Chx10. (c) Merged a and b. (d) DAPI stained blue cell nuclei. (e) 60% of cells in established hRPE cell line expressed Ki67+. (f) Merged d and e. (g) Cell nuclei were stained blue using DAPI, (h) 50% of cells revealed Oct4 nuclei expression in established hRPE cell line. (i) Merged g and h. (j) Nuclei of cells were stained blue using DAPI. (k) 4% of established hRPE cells were positive for Pax6+ expression in culture. (l) Merged j and k (magnification, ×400). hRPE, human retinal pigment epithelial; DAPI, diamidino-2-phenylindole.|
Click here to view
|Figure 4. Negative controls in which the primary antibodies for Ki67 and Pax6 (b), Chx10 (d) Oct4 (f) were omitted, showed no immune-reactivity. (a, c and e) Nuclei of the cells were stained blue using DAPI; pictures are related to fields b, d and f respectively. (h) Shows a control without both primary and secondary antibodies. Nuclei of the cells were stained blue using DAPI (g) (magnification: ×400). DAPI, diamidino-2-phenylindole.|
Click here to view
Studying Morphology of hRPE Cells on Alginate Films
Morphology of hRPE cells was the same as that derived from 1 or 2% of alginate films, which were gelatinized with 1 or 10% NCCM. After 1 day in vitro (DIV) cells were observed as single cells adherent on alginate. After 2 to 6 DIV, single cells started to make colonies with sustained contact to alginate film; these colonies became larger over time and eventually separated from the alginate film and got suspended in the medium. After 10 DIV, giant colonies were easily detected in the supernatant of the cultures. After 13 DIV, all colonies were floating in culture media [Figure 5].
|Figure 5. Morphology of hRPE cell line on 2% alginate film gelatinized with 1% NCCM. (a) Single cells on the first day of cultures. (b-d) represent hRPE cell line 3, 5 and 6. days after the beginning of the culture respectively. (e) Giant macroscopic colonies of hRPE cell line were disengaged from alginate film 10. days later. (f) All colonies were dissociated from the alginate film 13 days later. Magnifications. (a-e: ×200 and f: ×50). hRPE, human retinal pigment epithelial; DAPI, diamidino-2-phenylindole.|
Click here to view
Study that Examines Viability of hRPE Cells in Colonies
Human RPE colonies harvested from the supernatant of corresponding cultures and directly, without further manipulations, were re-plated on polystyrene plates without alginate coats. At first they adhered to the polystyrene surface and took morphological features of native RPE cells in cultures. They grew rapidly and reached full confluency until the 6th day in culture. They grew three dimensionally and made adjoining colonies and with time, disengaged from culture surfaces and became floating in the medium. Finally, dense colonies on polystyrene surface got suspended in DMEM/F12 medium in the 9th day [Figure 6].
|Figure 6. Re-plating hRPE colonies. (a) 1 day after re-plating, evidence of colony adherence to the polystyrene were manifested. (b and c) 2 to 6. days after re-plating, hRPE cells disengaged from colony structures and started to re.adhere to culture surface. (d-f) Represent a colony of hRPE cells that partially dissociated from the culture vessel surface, a suspended colony of hRPE cells and a colony of hRPE cells that completely disengaged from the culture vessel, 9 days post re-plating, respectively. Magnifications. (a: ×200 and b-f:×100). hRPE, human retinal pigment epithelial.|
Click here to view
Determination of the Best Condition for Culture of hRPE Cells
The number of hRPE cells on alginate substrate after 13 DIV demonstrated that hRPE cells showed better growth on 1% alginate film gelatinized with 1× NCCM (P = 0.0003), 1% alginate film gelatinized with 10× NCCM (P = 0.0004), 2% alginate film gelatinized with 1 × NCCM (P = 0.00003) and 2% alginate film gelatinized with 10× NCCM (P = 0.0038) as compared with polystyrene. The number of hRPE cells on 1% alginate film, gelatinized with 1× and 10× NCCM and 2% alginate film gelatinized with 10× NCCM was 1.3 times that of polystyrene controls. The total number of hRPE cells cultured on 2% alginate film gelatinized with 1× NCCM was 1.8 times that of polystyrene controls [Figure 7]. Human RPE cells showed the highest level of growth, and they built macroscopically giant colonies on 2% (v/w) alginate film gelatinized with 1× NCCM [Figure 8].
|Figure 7. hRPE cell growth on alginate film. Cells showed a faster growth rate on 1% alginate film gelatinized with ×1 NCCM (*P value = 0.0003), 1% alginate film gelatinized with ×10 NCCM (**P value = 0.0004), 2% alginate film gelatinized with ×1 NCCM (***P value = 0.00003) and 2% alginate film gelatinized with ×10 NCCM (****P value = 0.0038) as compared to cultures on polystyrene (control). hRPE, human retinal pigment epithelial; NCCM, neurobasal cell culture medium.|
Click here to view
|Figure 8. Growth of hRPE cell line on 2% alginate film 10 DIV. (a) hRPE cells on 2% alginate film gelatinized with 1% NCCM. (b) hRPE cells on 2% alginate film, gelatinized with 10% NCCM. hRPE cell line showed a faster growth rate and made larger colonies on 2% (v/w) alginate film, gelatinized with ×1 (NCCM). Magnifications ×50. hRPE, human retinal pigment epithelial; NCCM, neurobasal cell culture medium.|
Click here to view
The Effect of Alginate Film on the Growth of hRPE Cells
MTT cell assay showed that hRPE cells revealed better growth on 1% alginate film gelatinized with 1× NCCM (P = 0. 02), 1% alginate film gelatinized with 10× NCCM (P = 0.02), 2% alginate film gelatinized with 1× NCCM (P = 0.00008) and 2% alginate film gelatinized with 10 × NCCM (P = 0.02) as compared to polystyrene. The best condition for culture of hRPE cells was on 2% alginate film, gelatinized with 1× NCCM [Figure 9].
|Figure 9. MTT assay. hRPE cell line exhibited a significant increase in total number on alginate film as compared to polystyrene. hRPE cells represented preferred growth on 1% alginate film gelatinized with ×1 NCCM (*P value = 0. 02), 1% alginate film gelatinized with ×10 NCCM (**P value = 0.02), 2% alginate film gelatinized with ×1 NCCM (***P value = 0.00008) or 2% alginate film gelatinized with ×10 NCCM (****P value = 0.02) as compared with polystyrene (control). hRPE cell line showed the best growth rate when cultured on 2% (v/w) alginate film, gelatinized with ×1 (NCCM). hRPE, human retinal pigment epithelial; NCCM, neurobasal cell culture medium; MTT: 3_(4.5_dimethylthiazol_2yl)_2.5_diphenyltetrazolium bromide.|
Click here to view
| Discussion|| |
This study pursued hRPE cell line development and maintenance on alginate film; its characteristics were studied and compared with native hRPE cells. Immunocytochemical analysis demonstrated expression of Ki67+ proliferative marker and specific markers of stem cells and progenitor cells including Oct4, Pax6, and Chx10 in the established cell line. This indicated that isolated cells retained proliferative and stem cell potential in vitro. While native hRPE cells, as controls, did not express the aforementioned markers in a reasonable amount.
In previous experiments, collagen, gelatin, fibrinogen  and poly-l-lactic acid (PLLA) have been reported as promising substrates for development of RPE cells. Machida-Sanoet al investigated the effect of five different types of ions cross-linked on alginate films (i.e., Fe 3+, Al 3+, Ca 2+, Ba 2+, and Sr 2+) on cellular growth and showed that Fe 3+-cross-linked alginate films supported cell growth superiorly. In another experiment, the effect of Fe 3+ and Ca 2+ ions, as reagents inducing polymerization of alginate, was assessed on human dermal fibroblast growth and revealed a faster growth rate for cells cultured on Fe 3+-alginate films.
In this study, a thin layer of alginate film was used as a 3D in vitro model for culturing hRPE cells. Different concentrations of NCCM were used for polymerization of alginate and also for evaluation of its growth inducing effect on hRPE cells. Our data showed that the best condition for growth of hRPE cells was culturing the cells on 2% alginate film gelatinized with 1× NCCM.
Previous studies have investigated that human hepatocyte cell line formed adhesive colonies on alginate substrate. Studies have also indicated that alginate hydrogels were developed as a niche for corneal epithelial cells which formed colony structures on this substrate. The viability of primary epithelial cells increased when they were cultured on thin alginate discs. By encapsulating hRPE cells (ARPE-19) within alginate beads their viability and growth got improved.
Our previous research demonstrated that growth of hRPE cells was increased on alginate or alginate/gelatin substrate (as compared to polystyrene), we indicated that they made giant colonies on these substrates. Re-plating harvested colonies on polystyrene and examining the cultures on the next consecutive days demonstrated that alginate film was biologically compatible with growth and expansion of hRPE cells in vitro. Cells on 1 mm thick 2% alginate prepared in water showed the highest growth rate.
Soft hydrogels of alginate gelatinized with 1× NCCM, promoted neuritis outgrowth of neural stem cells and increased differentiation of them to neural cells. In our study, 1× and 10× NCCM was used and we observed that hRPE cells displayed higher growth rates when cultured on 2% alginate film gelatinized with 1× NCCM. Mouse ESCs on alginate substrate did not spread and predominantly established "tissue-like" clumps. Our study revealed that by passing of time hRPE cells formed tissue-like clumps on alginate film; they joined each other and built macroscopically visible clumps. This study indicated that alginate film could be an ideal substrate for studies aimed at replacing healthy cells instead of diseased ones in injured tissues. Yamamotoet al also used alginate substrate for developing functional and transplantable vascular tissue grafts which increased the efficacy of cell-based therapeutic strategies in tissue engineering.
Our findings demonstrated that NCCM cross-linked alginate film supports the maintenance, proliferation, cell attachment properties, viability and growth of hRPE cells. Future in vivo studies as well as clinical trials are needed to clarify the potential application of alginate film and NCCM, as a biological material, for fabrication of tissue engineering scaffolds and cell transplantation purposes in retinal degenerative diseases.
In summary, 2% (v/w) alginate gelatinized with 1× NCCM made a thin film that supported the survival and growth of spontaneously established hRPE cells. It induced the cells to re-organize in giant macroscopically visible structures like spheroids, and offered a suitable substrate for culturing and expanding potential progenitor cells such as hRPE cells in vitro and for further in vivo or clinical applications in retinal degenerative diseases.
This work was supported by the Iranian Council of Stem Cell Technology trough grant number 410, registered at National Institute of Genetic Engineering and Biotechnology (NIGEB). We wish to acknowledge Meisam Lesani, Maliheh Davari for their contribution in completing this work.
Financial Support and Sponsorship
Conflicts of Interest
There are no conflicts of interest.
| References|| |
Boyer MM, Poulsen GL, Nork TM. Relative contributions of the neurosensory retina and retinal pigment epithelium to macular hypofluorescence. Arch Ophthalmol
Radtke ND, Aramant RB, Seiler MJ, Petry HM, Pidwell D. Vision change after sheet transplant of fetal retina with retinal pigment epithelium to a patient with retinitis pigmentosa. Arch Ophthalmol
Lavik E, Langer R. Tissue engineering: Current state and perspectives. Appl Microbiol Biotechnol
Niklason LE, Langer R. Prospects for organ and tissue replacement. JAMA
Drury JL, Mooney DJ. Hydrogels for tissue engineering: Scaffold design variables and applications. Biomaterials
von Heimburg D, Zachariah S, Heschel I, Kühling H, Schoof H, Hafemann B, et al. Human preadipocytes seeded on freeze-dried collagen scaffolds investigated in vitro
and in vivo
Croisier F, Jérôme C. Chitosan-based biomaterials for tissue engineering. Eur Polym J
Stillaert FB, Di Bartolo C, Hunt JA, Rhodes NP, Tognana E, Monstrey S, et al. Human clinical experience with adipose precursor cells seeded on hyaluronic acid-based spongy scaffolds. Biomaterials
Walton RL, Beahm EK, Wu L. De novo
adipose formation in a vascularized engineered construct. Microsurgery
Cho SW, Kim I, Kim SH, Rhie JW, Choi CY, Kim BS. Enhancement of adipose tissue formation by implantation of adipogenic-differentiated preadipocytes. Biochem Biophys Res Commun
Kang HW, Tabata Y, Ikada Y. Fabrication of porous gelatin scaffolds for tissue engineering. Biomaterials
Caterson EJ, Li WJ, Nesti LJ, Albert T, Danielson K, Tuan RS. Polymer/alginate amalgam for cartilage-tissue engineering. Ann N Y Acad Sci
Patrick CW Jr, Zheng B, Johnston C, Reece GP. Long-term implantation of preadipocyte-seeded PLGA scaffolds. Tissue Eng
Fischbach C, Spruss T, Weiser B, Neubauer M, Becker C, Hacker M, et al. Generation of mature fat pads in vitro
and in vivo
utilizing 3-D long-term culture of 3T3-L1 preadipocytes. Exp Cell Res
Kang X, Xie Y, Kniss DA. Adipose tissue model using three-dimensional cultivation of preadipocytes seeded onto fibrous polymer scaffolds. Tissue Eng
Ahearne M, Yang Y, El Haj AJ, Then KY, Liu KK. Characterizing the viscoelastic properties of thin hydrogel-based constructs for tissue engineering applications. J R Soc Interface
Turco G, Marsich E, Bellomo F, Semeraro S, Donati I, Brun F, et al. Alginate/hydroxyapatite biocomposite for bone ingrowth: A trabecular structure with high and isotropic connectivity. Biomacromolecules
Smidsrød O, Skjåk-Braek G. Alginate as immobilization matrix for cells. Trends Biotechnol
Matyash M, Despang F, Mandal R, Fiore D, Gelinsky M, Ikonomidou C. Novel soft alginate hydrogel strongly supports neurite growth and protects neurons against oxidative stress. Tissue Eng Part A
Sanie-Jahromi F, Ahmadieh H, Soheili ZS, Davari M, Ghaderi S, Kanavi MR, et al. Enhanced generation of retinal progenitor cells from human retinal pigment epithelial cells induced by amniotic fluid. BMC Res Notes
Bhatt NS, Newsome DA, Diamond JG. Experimental transplantation of human retinal pigment epithelial cells on collagen substrates. In: Coscas G, Piccolino F, editors. Retinal Pigment Epithelium and Macular Diseases. Vol. 62. Netherlands: Springer; 1998. p. 135-141.
Yaji N, Yamato M, Yang J, Okano T, Hori S. Transplantation of tissue-engineered retinal pigment epithelial cell sheets in a rabbit model. Biomaterials
Blombäck B. Fibrinogen structure, activation, polymerization and fibrin gel structure. Thromb Res
Thomson HA, Treharne AJ, Walker P, Grossel MC, Lotery AJ. Optimisation of polymer scaffolds for retinal pigment epithelium (RPE) cell transplantation. Br J Ophthalmol
Machida-Sano I, Hirakawa M, Matsumoto H, Kamada M, Ogawa S, Satoh N, et al. Surface characteristics determining the cell compatibility of ionically cross-linked alginate gels. Biomed Mater
Machida-Sano I, Matsuda Y, Namiki H.In vitro
adhesion of human dermal fibroblasts on iron cross-linked alginate films. Biomed Mater
Khalil M, Shariat-Panahi A, Tootle R, Ryder T, McCloskey P, Roberts E, et al. Human hepatocyte cell lines proliferating as cohesive spheroid colonies in alginate markedly upregulate both synthetic and detoxificatory liver function. J Hepatol
Wright B, De Bank PA, Luetchford KA, Acosta FR, Connon CJ. Oxidized alginate hydrogels as niche environments for corneal epithelial cells. J Biomed Mater Res A
Wikström J, Elomaa M, Syväjärvi H, Kuokkanen J, Yliperttula M, Honkakoski P, et al. Alginate-based microencapsulation of retinal pigment epithelial cell line for cell therapy. Biomaterials
Najafabadi HS, Soheili ZS, Ganji SH. Studying the morphology and growth of human retinal pigment epithelial cells on a thin layer of alginate and alginate/gelatin as a culture substrate. Modares J Med Sci
Wright B, Cave RA, Cook JP, Khutoryanskiy VV, Mi S, Chen B, et al. Enhanced viability of corneal epithelial cells for efficient transport/storage using a structurally modified calcium alginate hydrogel. Regen Med
Candiello J, Singh SS, Task K, Kumta PN, Banerjee I. Early differentiation patterning of mouse embryonic stem cells in response to variations in alginate substrate stiffness. J Biol Eng
Yamamoto M, James D, Li H, Butler J, Rafii S, Rabbany S. Generation of stable co-cultures of vascular cells in a honeycomb alginate scaffold. Tissue Eng Part A
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9]
|This article has been cited by|
||Retinal cell regeneration using tissue engineered polymeric scaffolds
| ||Maria Abedin Zadeh,Mouhamad Khoder,Ali A. Al-Kinani,Husam M. Younes,Raid G. Alany |
| ||Drug Discovery Today. 2019; |
|[Pubmed] | [DOI]|
||Screening and optimization of potential injection vehicles for storage of retinal pigment epithelial stem cell before transplantation
| ||Yangzi Tian,Richard Davis,Michael R. Zonca,Jeffrey H. Stern,Sally Temple,Yubing Xie |
| ||Journal of Tissue Engineering and Regenerative Medicine. 2018; |
|[Pubmed] | [DOI]|
||Effects of fibrin glue as a three-dimensional scaffold in cultivated adult human retinal pigment epithelial cells
| ||Sahar Balagholi,Mozhgan Rezaei Kanavi,Shaban Alizadeh,Rasul Dabbaghi,Samira Karami,Bahareh Kheiri,Narsis Daftarian |
| ||Journal of Biomaterials Applications. 2018; 33(4): 514 |
|[Pubmed] | [DOI]|